• Model: CSH
• Dehumidification capacity: 588 ml/d
• Rated power: 60W
• Mounting: DIN rail mounting
• Humidity control range: 25%–98%
• Body material: Aluminum alloy
• Rated voltage: 220V
• Applicable area: Industrial
• Airflow: 400 m³/h
• Dimensions (L × W × H): 115 × 78 × 200 mm
• Drainage: Direct drain via hose
• Airflow direction: Rear; top air inlet, front air outlet
• Weight: 0.8 kg
• Operating range: 5–50°C / 25–98% RH
• Protection: High-temperature protection
• Humidity control accuracy: ±3%
• Control mode: Electronic

Product Features

• Aluminum alloy housing
• Aluminum profile heat dissipation
• High-precision display of the current ambient temperature and humidity
• Adjustable dehumidification set point
• Dual-fan heat dissipation
• Ultra-thin design (47 mm thick)
• High dehumidification efficiency (water output of the 60W model: 450 ml)

SKU Options

Dimensions: 197 (H) × 115 (W) × 47 (D) mm

Dehumidifying power: 20W, 30W, 40W, 50W, 60W

Wiring

Installation

How Dehumidification Works

1. When the humidity sensor detects that humidity has reached the upper set limit, the dehumidifier starts dehumidifying. When humidity falls to the set cut-off value, it stops. This cycle repeats to keep humidity under control.
2. The dehumidifier measures the current ambient temperature and humidity, and its software calculates the dew point of the environment. When the dew point is reached, it starts dehumidifying and switches on the heating contact at the same time. Once the dew point condition is broken, heating stops while dehumidification continues, and the unit stops after a set delay.

Note: Models without “T” in the model number do not have dew-point detection.

Special Functions

1. Automatic defrost:
All series have an automatic defrost function. When frost forms on the condensing plate, the dehumidifier defrosts automatically before resuming dehumidification.

2. Low-temperature heating (optional, selected according to site conditions):
When the dehumidifier detects that the ambient temperature is low, it automatically switches on an external heater for temperature compensation.